Dingli Strong Ceramic Tile Adhesive
Dingli Strong Ceramic Tile Adhesive
Product Briefing
This product is a high-quality product synthesized from high-quality Portland cement, specially selected high hardness graded sand, high-quality latex powder, and functional additives. It has the characteristics of high bonding strength and good construction performance. Suitable for indoor tile, mosaic and other tiling.
Product Features
Firmly bonded, not prone to hollowing and peeling
Good water resistance
Convenient construction
Clean and environmentally friendly
Product specifications
25KG/bag
Scope of application
Suitable for wall and ground stable base, such as concrete, cement mortar, cement-based waterproof mortar and other base tiling.
Execution standards
GB/T 25181-2019 DTA-I type
Construction method
Base treatment
The base layer should be solid, clean, free from shaking, oil stains, wax stains, concrete curing agents, and other loose materials. Before construction, it is necessary to wet the base layer to a dry outside and wet inside state in areas with high water absorption or in high-temperature and dry environments. After the completion of the new concrete surface construction, it should be cured for 28 days before tiling. The old concrete and plaster surfaces can be cleaned with a cleaning agent, rinsed with a high-pressure faucet, and dried for 24 hours before tiling.
Preparation of adhesive slurry
Add an appropriate amount of water to the mixing bucket and slowly add the powder while stirring. The mixing ratio is 25kg of powder and 5.3-5.8L of water (subject to construction convenience). Mix with an electric mixer until there are no lumps, let it sit for 3 minutes, and mix thoroughly again before use. It is best to complete the construction within 1 hour.
Ceramic tile pasting
Use a toothed scraper to apply tile adhesive to the base layer, evenly distribute it, and comb it into tooth shaped strips. Apply about 1 square meter each time, and then knead and press the tiles on top during the drying time. The depth of the scraper teeth should consider the flatness of the working surface and the unevenness of the back of the ceramic tiles.
Precautions
Construction temperature: 5-35 ℃.
Before tiling, the release agent on the back of the tiles must be cleaned thoroughly.
If the groove on the back of the tile is deep, double coating should be applied, that is, both the base layer and the back of the tile should be filled with adhesive at the same time.
This product contains cement, which can cause an alkaline reaction when in contact with water. Inhalation or ingestion can be harmful to the body. In case of skin contact, rinse with water directly. In case of accidental eye contact, seek medical attention promptly. Avoid contact with children.
Reference amount
(Approximate value, depending on the flatness of the base surface)
| Specification of toothed scraper | usage |
| 6mm*6mm | 3kg/m2 |
| 10mm*10mm | 5kg/m2 |
| 12mm*12mm | 8kg/m2 |
Transportation and storage
Avoid rain and sun exposure during transportation. Store in a cool and dry warehouse to prevent moisture and strictly prohibit contact with water.
Storage period: 6 months.
